why wont my windshield wipers turn on

Why Won’t My Windshield Wipers Turn On? [FIXED]

If the windshield wipers are not turning on, it can be due to issues like a deactivated switch or empty fluid reservoir to more complex problems like electrical malfunctions or mechanical breakdowns. Identifying the root cause is crucial for a timely and effective fix.

Why Won’t My Windshield Wipers Turn On?

When your windshield wipers refuse to turn on, the problem could stem from a range of simple to complex issues. Based on our experience, we’ve identified the most common culprits and how e

Ensure the wiper switch is properly engaged. Sometimes, a firmer press or checking the intermittent settings might be necessary.

In addition, worn-out or damaged wiper blades often fail to make proper contact with the windshield. We recommend inspecting them for any cracks, tears, or signs of wear.

In winter conditions, snow or ice can accumulate on the blades or arms, preventing movement. Car defrosters can help you with this. 

Moreover, some vehicles require a sufficient level of windshield washer fluid for the wipers to operate. It’s worth checking and refilling the reservoir if needed.

A common issue is a blown wiper fuse, which can happen due to motor overload or a short circuit. We suggest consulting your car’s manual to locate and check the fuse.

The wiper relay, controlling power to the motor, can fail and disrupt the wiper function. Replacing a faulty relay is often a straightforward fix.

Inspect for any loose or damaged electrical connections, as these can interfere with the power supply to the motor. Visible wear or corrosion needs attention.

A burned-out wiper motor or internal failure can lead to non-functioning wipers. This repair is typically more complex and might require professional assistance.

The linkage connects the motor to the wiper blades and arms. Any damage or disconnection here can prevent the wipers from moving.

How Do I Get My Windshield Wipers to Turn On?

You can get your windshield wipers to turn on by stepping on this path.

  • Locate the Wiper Control

 The wiper control is typically found on the vehicle’s dashboard or one of the steering column’s stalks. In most modern cars, it’s a lever located on the right-hand side of the steering wheel.

This lever is used to control both the wipers and the washer fluid. It’s important to familiarize yourself with its position and function, which can vary slightly depending on the make and model of your car.

  • Turn the Ignition On 

The vehicle’s ignition needs to be on for the wiper system to work. This doesn’t necessarily mean starting the engine; in many vehicles, turning the key to the ‘accessory’ position or pushing the start button without depressing the brake pedal (in push-to-start vehicles) is enough to power the electrical systems, including the windshield wipers.

  • Select Wiper Speed

Once the ignition is on, you can choose the wiper speed. There are usually several settings, from slow to fast. It’s important to select a speed that matches the intensity of the rain or snowfall. For light rain or mist, a slower setting might be adequate, while heavier rain will require a faster wiper speed to maintain clear visibility.

  • Adjust Intermittent Wipers

If your car has intermittent wipers (which most modern cars do), you can adjust the frequency of the wipes to suit the weather conditions. This feature is particularly useful in light rain or drizzle, allowing you to set the wipers to automatically swipe at regular intervals without having to manually activate them each time.

  • Activate Washer Fluid

If your windshield is dirty or smeared, you can use the washer fluid to clean it. This is typically done by pulling the wiper control lever towards you. The washer fluid is sprayed onto the windshield, and the wipers automatically swipe a few times to clear the liquid and debris. This feature is useful for removing dirt, bug splats, or other substances that can obstruct your view.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *