How to Reset Windshield Washer Fluid Light? (Quick and Easy Guide)
If the windshield washer fluid light is on in your car, resetting the windshield washer fluid light can help the situation. However, if you are uncertain how to reset windshield washer fluid light, it should not be a concern because you are at the right place to find answers.
The windshield washer fluid light igniting can be fixed if you refill the windshield washer fluid, but if the light continues to ignite, resetting is the quickest option. Hence, in this article, we have discussed how to reset windshield washer fluid light with a guide to find a solution for your answers.
Why is the Windshield Washer Fluid Light On?
The most common issue associated with the windshield washer fluid light is that the fluid levels are low in the windshield.
When the windshield fluid is low, the vipers cannot clean the windscreen with insufficient fluid. As a result, it notifies the driver with a warming light on the dashboard screen.
However, if the windshield washer fluid light ignites after a refill, check if the washer fluid level switch is stuck or broken. The windshield washer fluid light may also be on if the fluid level sensor is faulty and malfunctioning.
What does the Windshield Washer Fluid Light Indicate?
Most of us might need clarification on what the windshield washer light indicates when it ignites. However, as stated, if the windshield washer fluid light in your car is on, the first suspect is low fluid, or the windshield washer fluid reservoir is empty.
Hence if the fluid levels are low, it notifies the does have enough fluid to spray and clean the windshield. However, if the fluid levels are correct in the windshield washer reservoir, it is better to check for any defects in the system.
Can I Drive with a Windshield Fluid Washer Light On?
Though it is safe and harms the engine when the fluid washer light is on, driving with a light igniting will be annoying and disturbing.
It is also distracting, making it impossible to drive because the windshield washer fluid light appears as a red triangle on the screen, grabbing the centre of attraction in the screen.
Though it disappears when you press the DISP button, it pops every few minutes, which is annoying. It is also unsafe because the driver will have a hard time giving his fullest concentration on the road while driving.
How to Reset Windshield Washer Fluid Light?
Though the windshield light does not have any potential risk to your vehicle, it can be annoying when the lights pop on the screen repeatedly. Thus, when the windshield washer fluid light is on in your car, resetting can help to turn them off if refilling the windshield washer fluid reservoir does not help.
However, before resetting the windshield washer fluid light, you first try to turn on and off the ignition key a few times to check if the light is off. If not, the above method of disconnecting the battery and connecting them back can also help to reset the system.
As given below, there are plenty of methods to reset windshield washer fluid light.
But, before you reset the windshield washer fluid light in the car, clean the pump and hose, remove all the debris, and refill the washer fluid tank.
The first method to reset the windshield washer fluid light, the gas pedal method, is instructed below.
- Turn on the ignition key.
- Press the gas pedal five times in a row in three seconds. Now check if the windshield washer fluid light is off.
If the above method does not work, you can try resetting using a Diagnostic Tool. Connect the Diagnostic tool to the Car’s OBD 2 (On Board Diagnostics) port and follow the instruction accordingly on the screen. The instructions will lead to resetting the windshield washer fluid light.
If the windshield washer fluid light does not reset with the above methods, you can try resetting the ECU. Since the windshield washer fluid light is connected to the car’s ECU (Engine Control Unit), resetting can help.
First, turn off the car and locate the ECU fuse in the box, referring to the car manual. Remove the fuse carefully and wait a few minutes before you plug the fuse back.
In most cases, one of the above methods can help reset the windshield washer fluid light if the light does not turn off even after refilling. However, if the above methods do not work, you can contact a professional to fix the issue.
The Low Windshield Washer Fluid Light Won’t Turn Off. Why?
If you have refilled the windshield washer fluid, but it still indicates a red triangle warning light on the screen, you can check for other defects in the system as stated. The windshield washer fluid warning light also ignites when the washer fluid switch is on or broken, leakages in the reservoir, or the fluid washer sensor are faulty and malfunctioning.
How Do you Fix a Washer Fluid Sensor?
One of the reasons for the windshield washer fluid light to ignite is when the fluid sensor level is faulty and malfunctioning. As a result, you will need to replace the sensors to turn off the windshield washer fluid light.
First, locate the sensors in the washer fluid bottle behind the bumper and next to the passenger fender and remove it. Remove the sensor and replace it with a new one, but choose the correct type considering the car model.
How Much does It Cost to Fix the Windshield Washer Fluid Light?
If resetting the windshield washer fluid light does not turn off the light, it is recommended to visit a professional to turn to fix the issue. However, the cost to fix the windshield washer fluid light depends on the defect of the windshield washer fluid system.
If the washer fluid sensor is faulty and needs a replacement, it might cost between $20 to $60, and if there are any leakages or crack in the windshield washer fluid reservoir, it might cost between $50 to $150. But the cost also adds labour charges of up to $150.
Watch this one,
Video Credits – Auto Resource
Continue Exploring: More Articles to Keep You Engaged
